M2-750X5

M2 750 Watt 5-Channel Element Ready™ Amplifier
M2-750X5
Designed to withstand the elements, the R2-750X5 amplifier is an Element Ready™ 750 watt, full-range class-D model, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono with a subwoofer channel that can be run at 4Ω or 2Ω. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.

FEATURES AT A GLANCE
C.L.E.A.N. input/output clip detection and indicator LEDs
Conformal coated circuit board protects against dust and water
Optimized using AudioGraph PowerCube measurement tool
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
Zinc Nickel-plated Marine grade brass connection terminals
Element Ready™ design protects against outdoor exposure
Integration with OEM and Aftermarket Radios
Low Impedance Stability
RATS (Rockford Automated Testing System) proprietary quality & performance tested
Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
Continuously Variable On Board Punch EQ
Top Mounted Control Panel
Short Circuit & Over Current Protection
2/4/5 Channel Input Selection Switch
Includes RLC Remote Level Control
Variable Infrasonic Filter
Balanced Differential Inputs eliminates noise picked up by signal cables
Integrated Power and Speaker Terminals
UV stable powder coated cast aluminum heatsink
“Auto-Sense” turn-on with remote out (high level in)
Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
2-Year Warranty
CEA-2006 Compliant & CE Compliant
Rollback Protection

Number of Channels 5
Total Power
(Sum of Rated Power)750 Watts
Rated Power
(RMS Continuous Power)50 Watts x 4 + 200 Watts x 1 @ 4Ω
100 Watts x 4 + 350 Watts x 1 @ 2Ω
200 Watts x 2 + N/A @ 4Ω Bridged/Mono
Dynamic Power
(PVC/PowerCube®)70 Watts x 4 + 241 Watts x 1 @ 4Ω
114 Watts x 4 + 426 Watts x 1 @ 2Ω
234 Watts x 2 + N/A @ 4Ω Bridged/Mono
BridgeableYes
Frequency Response20 Hz – 20 kHz
Input SensitivityLow-Level: 150 mV – 4 V
High-Level: 450 mV – 12 V
Circuit Topology ClassClass D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)4Ω: <1.0%
2Ω: <1.0%
Signal InputFront Low-Level: 2 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 2 RCA
Rear High-Level: 4-Pin Molex
Sub Low-Level: 2 RCA
Sub High-Level: 4-Pin Molex
Signal OutputN/A
Tone Controls0 to +18 dB @ 45 Hz
Crossover ControlsFront High-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Front Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Rear High-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Rear Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Sub Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth
Sub Infrasonic:
15 Hz – 40 Hz @ 12dB/Octave Butterworth
Remote ControlsYes
Visual IndicatorsPower/Protect
C.L.E.A.N. In
C.L.E.A.N. Out (front)
C.L.E.A.N. Out (rear)
C.L.E.A.N. Out (sub)
Power Wire Gauge4 AWG
Power Input ConnectorCompression Terminal Block
Speaker Wire Gauge8 AWG
Speaker Output ConnectorCompression Terminal Block
CoolingConvection
Heatsink
Operating Voltage9 – 16 VDC
Recommended Fuse
(not included)120 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)71 A
Suggested Alternator
Included In The Box
Dimensions (H x W x D)1.9″ x 6.8″ x 11.2″
(4.9 cm x 17.3 cm x 28.5 cm)
Shipping Weight6.13 Lbs. (2.78 Kg)