R2-750X5

Prime 750 Watt 5-Channel Amplifier
R2-750X5
Primed for Performance, the R2-750X5 is a 750 watt rated, full-range class-D amplifier capable of operating at 4Ω or 2Ω stereo with a mono subwoofer channel that can be run at 4Ω or 2Ω. The front/rear stereo channels can also be run at a 4Ω bridged/mono load. This amplifier is extremely efficient because of its Class-D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more dynamic power as voltage increases, and an integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
FEATURES AT A GLANCE
Balanced Differential Inputs with RCA Pass Through Outputs
Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
2/4/5 Channel Input Selection Switch
High Level Input Capable
Features C.L.E.A.N. Set-up
Short Circuit & Over Current Protection
Top Mounted Control Panel
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
Rollback Protection
Includes RLC Remote Level Control
Variable Infrasonic Filter
Cast aluminum heat sink
Continuously Variable On Board Punch EQ
CEA-2006 Compliant & CE Compliant
Front, Rear and Sub Variable Input Gain adjustment level
Full Range Class-D
1 Year Warranty
Number of Channels5
Total Power
(Sum of Rated Power)750 Watts
Rated Power
(RMS Continuous Power)50 Watts x 4 + 200 Watts x 1 @ 4Ω
100 Watts x 4 + 350 Watts x 1 @ 2Ω
200 Watts x 2 + N/A @ 4Ω Bridged/Mono
Dynamic Power
(PVC/PowerCube®)70 Watts x 4 + 241 Watts x 1 @ 4Ω
114 Watts x 4 + 426 Watts x 1 @ 2Ω
234 Watts x 2 + N/A @ 4Ω Bridged/Mono
BridgeableYes
Frequency Response20 Hz – 20 kHz
Input SensitivityLow-Level: 150 mV – 4 V
High-Level: 450 mV – 12 V
Circuit Topology ClassClass-D
Efficiency (average)
Total Harmonic Distortion (THD+Noise)Front/Rear 4Ω: <1.0%
Front/Rear 2Ω: <1.0%
Sub 4Ω: <1.0%
Sub 2Ω: <1.0%
Signal InputFront Low-Level: 2 RCA
Front High-Level: 4-Pin Molex
Rear Low-Level: 2 RCA
Rear High-Level: 4-Pin Molex
Sub Low-Level: 2 RCA
Sub High-Level: 4-Pin Molex

Input Switch: 2/4/5 Input
(works for RCA/Hi-Level inputs)
Signal OutputN/A
Tone Controls0 to +18 dB @ 45 Hz
Crossover ControlsFront High-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth

Front Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth

Rear High-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth

Rear Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth

Sub Low-Pass:
50 Hz – 250 Hz @ 12dB/Octave Butterworth

Sub Infrasonic:
15 Hz – 40 Hz @ 12dB/Octave Butterworth

Remote ControlsYes
Visual IndicatorsPOWER (Blue) / PROTECT (Red)
C.L.E.A.N. IN (Red)
C.L.E.A.N. OUT Front (Blue/Red)
C.L.E.A.N. OUT Rear (Blue/Red)
C.L.E.A.N. OUT Sub (Blue/Red)
Power Wire Gauge4 AWG
Power Input ConnectorCompression Terminal Block
Speaker Wire Gauge8 AWG
Speaker Output ConnectorCompression Terminal Block
CoolingConvection
Heatsink
Operating Voltage9 – 16 VDC
Recommended Fuse
(not included)120 A
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)71 A
Suggested Alternator
Included In The Box
Dimensions (H x W x D)1.9″ x 6.8″ x 11.2″
(4.9 cm x 17.3 cm x 28.5 cm)